Innovative and solution-oriented mining, construction and engineering equipment and service distributor Hilti Zimbabwe has moved in to reduce effort and risk in the mining industry in an effort to help in the attainment of the US$12 Billion mining roadmap.
Rudairo Mapuranga
The country through the President of Zimbabwe H.E Emmerson Dambudzo Mnangagwa aims to transform the mining industry into a US$12 Billion sector by 2023 consequently playing a huge role in the attainment of vision 2030 where the nation’s economy is expected to become a middle-income earner by 2030.
Hilti’s Managing Director Mr Scott Smith said his company has a lot of solutions for the mining sector in Zimbabwe and was prepared to bring more solutions into the sector for the betterment and growth of the industry.
“We have a focus on the mining sector, we do have a lot of applications into the mining sector, we are a solution-oriented company, Hilti’s model is we look for solution, we have a lot of solutions for the mining industry.”
The company offer the following solutions for the mining industry among others
VENT CURTAIN COMBO-
Features
1x Cordless rotary hammer TE 6-A 36 Volts and 1x Quick-release chuck packed
2x Battery pack 36 Volts 5.2 Ah
1x Battery charger C 4/36-350
1x Hammer drill bit TE-CX 8mm diameter 120mm length
1000x Insulation mandrel IDP 0/2
Applications
Avoid use of roof bolts in stopes when installing vent curtains by means of cordless installation of IDP fasteners
SURVEY PEG COMBO
Features
1x Cordless rotary hammer TE 4-A 22 Volts
1x Dust removal system TE DRS-4-A
2x Battery pack 22 Volts 5.2 Ah Li-ion and 1x Battery charger C 4/36-350
1x Hammer drill bit TE-CX 6mm diameter 120mm length
1000x Ceiling anchors M6 x 30 HHDCA
Applications
Cordless, dustless solution to faster survey peg installation; replace conventional block and spad method with 6mm tie wire wedge anchor, resulting in safer and faster production.
STRAINING WIRE COMBO
Features
1x Cordless rotary hammer TE 6-A36 and 1 x Quick-release chuck packed
2x Battery pack36 volts 5.2 Ah and 1x Battery charger C 4/36-350
1x Hammer drill bit TE-CX 10mm diameter 170mm length
1000x Stud anchor HSA M10x98
1000x Eye nut M10 zinced
Applications
Cordless solution by means of expansion anchor for installation of straining wire, lifelines, bell wire, vent brattices, signage, electric panels and junction boxes into rock and concrete.
IMPACT WRENCH COMBO
Features
1x Cordless impact wrench SIW 9-A 22 Volts 3/4 inch
2x Battery pack B 22 Volts 8 ah Li-ion
1x Battery charger C 4/36-350
8x Impact socket SI-S 3/4 inch ( 17L, 19L, 21L, 24L, 27L, 30L, 32L, 36L
Applications
Move away from conventional spanners and air hoses with cordless impact wrench for fastening/loosening of bolts and nuts on motors, pumps, pipe columns, brackets, vent doors, shaft work and more.
RIGGING HOLE COMBO
Features
1x Cordless SDS Max Rotary Hammer TE 60-A 36 Volts
2x Battery pack B 36 Volts 9 Ah Li-ion
1x Battery charger C 4/36-350
1x Hammer drill bit TE-YX 35mm diameter 570mm length
Applications
New 36mm rigging holes can be drilled into rock by means of our cordless solution in the TE 60-A36 Cordless SDS Max Rotary Hammer and TE YX drill bit. No services needed.
CEILING ANCHOR HHDCA
Features
One-piece metal hanger
Hammer into hole and pull back using claw hammer to set quickly and easily
Applications
Medium-duty ceiling wire hanger applications such as light fixtures, suspended ceilings, etc.
STUD ANCHOR HAS
Features
First ETA-compatible stud anchor for torque-controlled setting using an impact wrench and Hilti torque bar for higher productivity in serial applications
Excellent edge and spacing distances
3 embedment depths offering maximum flexibility
Applications
Wide range of fastening applications in un-cracked concrete, Handrails & balustrades, Ladder & staircases, Guard rails
INSULATION MANDREL IDP
Features
Quick and easy impact installation, Insulating material thickness: up to 150 mm, Depth of embedment: 25 mm
Applications
Fastening hard, self-supporting, insulating materials such as expanded polystyrene